Jump to content


Project "mild 2 Wild"


101 replies to this topic

#1 Guest_Spenc_*

  • Guests

Posted 23 March 2005 - 05:41 PM

Project 'MILD 2 WILD'


Time has come for Project MILD 2 WILD on our 2KOOL CUSTOMS in-house project Hot Rod '1FUN TOY', which can be seen below in it's photo shoot for 'polk audio' and also in our 2KOOL CUSTOMS sponsor appreciation page here - http://2koolperformance.ca/custom.htm As always, it's going to get ugly before it gets pretty, so join along with us as we begin this project which has gained the support from the biggest names in the Industry!

Without our proud sponsors getting this wild ride to three consecutive National FUN FORD Weekend Series 'Best of Show' Championships wouldn't have been possible. To show our thanks we'll now take the support we've earned and complete our goal of running 9 seconds in 'show form', all to keep maximum exposure on the great companies that have bought into our business moto - "LOOK GOOD & GO FAST"

It will take some very talented people and a crap load of power to pull this project off so we encourage you our clients, friends, and associates to 'ENJOY THE RIDE' along with us cool.gif


For their continued support we would like to thank the following:

VORTECH - http://www.vortechsuperchargers.com/
DYNAMIC Racing Transmissions - http://www.dynamicracingtrans.com/
UPR PRODUCTS - http://www.uprproducts.com/
CRANE CAMS - http://www.cranecams.com/
D'SOUSA PERFORMANCE - http://www.dsousaperformance.com/
KELLY'S KUSTOM PAINT - 613 652-4810
MR CAR'S PAINT - 613 938-2250
DART http://www.dartheads.com/homepage.aspx
MSD IGNITION - http://www.msdignition.com/
MOSER - http://www.moserengineering.com/
SCAT - http://www.scatcrankshafts.com/
NITROUS EXPRESS - http://www.nitrousexpress.com/
FLAMING RIVER - http://www.flamingriver.com/
TRICK FLOW - http://www.trickflow.com/
ACCUFAB - http://www.accufabracing.com/
Mr. Gasket - http://www.mrgasket.com/
Childs & Albert - http://www.childs-albert.com/
B&M - http://www.bmracing.com/
JW Performance Transmissions - http://www.racewithjw.com/
AUTO METER - http://www.autometer.com/
MICKEY THOMPSON - http://www.mickeythompsontires.com
PRO M - http://www.pro-flow.com/
REICHARD RACING - http://www.reichardracing.com/
DR Gas - http://www.drgas.com/
HOOKER/HOLLEY - http://www.holley.com/hookerheaders/
SPIN TECH - http://www.spintechmufflers.com/
POWERMASTER - http://www.powermastermotorsports.com/
TCI - http://www.tciauto.com/
ROYAL PURPLE - http://www.royalpurple.com/
GRIFFIN - http://griffinrad.com/
FRAM - AUTOLITE - http://www.fram.com/
OPTIMA - http://www.optimabatteries.com/publish/opt...onfig/home.html
SCT - http://www.sctflash.com/
CPR RACING- http://www.cprracing.com/
PRO 5.0 - http://www.pro50shifters.meridian1.net/default.asp
BRISK USA - http://www.briskusa.com/
ENERGY SUSPENSION - http://www.energysuspension.com/
STAGE 8 - http://www.stage8.com/
FLUIDAMPR - http://www.fluidampr.com/
MIL0DON - http://www.milodon.net/
ARP - http://www.arp-bolts.com/
TAYLOR - http://www.taylorvertex.com
D.S.S Racing - http://www.dssracing.com/homepage.html
COAST HIGH PERFORMANCE - http://www.coasthigh.com/
POLK AUDIO - http://www.polkaudio.com/polk.html
STINGER - http://stingerelectronics.com/web/homepage_industrial.asp
FLORIDA 5.0 - http://www.florida50.com/
50Resto - http://www.50resto.com/
CHROME SERVICES - http://www.chromeservices.com
303 Products - http://www.303-products.com/
HIDDEN HITCH - http://www.hiddenhitch.com/Home/
MOTHER'S - http://www.mothers.com/
WILD RIDES - http://www.wildridesracecars.com/
FEDERAL MOGUL- http://www.federal-mogul.com/cda/homepage/index
COOLFLEX - http://www.coolflex.com/
NATIONAL AUTOMOTIVE - Domville Ont 613 925 5171
James Braden FORD - Kingston Ont http://www.jamesbradenford.com/

Attached image(s)

  • Attached Image: post-86-1111889644.jpg
  • Attached Image: post-1-1154467830.jpg


#2 Guest_Spenc_*

  • Guests

Posted 26 March 2005 - 09:11 PM

In preparation for HP that would turn most street rides into pretzels, we're getting ready here for a DYNAMIC RACING TRANSMISSIONS 'Mighty Mite' racing C4, thanks to Harold and JR MILLER. The most important part to our project will be getting some crazy HP to the rear wheels 'under control', and for that reason we turned to DYNAMIC. We'll have pics of the new tranny later in the season. First the new motor must be built , tested, and dyno'd so Harold and JR will have some #'s to play with.

http://www.dynamicracingtrans.com/

Attached image(s)

  • Attached Image: post-86-1111889473.jpg


#3 Guest_Spenc_*

  • Guests

Posted 26 March 2005 - 09:27 PM

Quality skilled technicians, always at work on our CUSTOM projects. Here's forums member Mustang:Ride The Horse carefully removing the stock tranny. And 'no' we're not sponsored by COKE - we wish!

Attached image(s)

  • Attached Image: post-86-1111890474.jpg


#4 Guest_Spenc_*

  • Guests

Posted 26 March 2005 - 09:31 PM

T-5 come out!! Like a Demon needing to be exorcised, that lil wimp of a thing is "OUTTA HERE".... It's all business from here on in cool.gif

Attached image(s)

  • Attached Image: post-86-1111890685.jpg


#5 Guest_Spenc_*

  • Guests

Posted 26 March 2005 - 09:36 PM

With the tranny dropped, there will be lots of time for ideas for our center consol area. Switching over from the stock T-5 to DYNAMIC'S Racing C4 will bring some interior changes, some of which we already have some KOOL ideas in mind.

Bob Ritzman, from B & M Racing and Performance Products has offered to help us with a shifter when the time comes. Thanks again Bob! cool.gif

Make sure to check out their world class products - here
http://www.bmracing.com/

Attached image(s)

  • Attached Image: post-86-1111890987.jpg


#6 Guest_Spenc_*

  • Guests

Posted 26 March 2005 - 09:41 PM

Like many projects before it, we're already hearing " why on earth " " how could you ever " and "what are they smoking ". Sure our ride is still in show form ( shown here below ), but when it comes to taking a car that on a good day may run high 12's on a lil sqeeeze.. and now is heading for 9's, "PRETTY" and "Show Ready" is not our priority for the time being. When done, this ride will be back ready for show.... with a Ho-Lotta Go!

Wrinkled tire photo's are where this project is heading, so step aside Monster Trophies.. "IT'S ON" tease.gif


Stay 'tuned' cool.gif

pretty lil 5.0.... out you come! :P

Attached image(s)

  • Attached Image: post-86-1111891297.jpg


#7 Guest_Spenc_*

  • Guests

Posted 26 April 2005 - 07:54 AM

Mickey Thompson Sponsors Project MILD 2 WILD

We would like to thank Don Sneddon from Mickey Thompson for his show of support, in offering our project a pair of ET Street 'Radials' joy.gif These are the tires thought to be illegal last season because of the numbers they were turning in pro competition.

Check out these world records, recorded on this particular Mickey Thompson product - ET record is 7.663@186.58MPH and the top end record was 7.704@189.87MPH.

We looked to Mickey Thompson so our wild ride doesn't come 'unglued' at the strip when we shoot for 9's :P

Thanks again Don

Attached image(s)

  • Attached Image: post-86-1114800442.jpg


#8 Guest_Spenc_*

  • Guests

Posted 22 May 2005 - 12:21 PM

As our DART block, Trick Flow heads and DSS Pistons and Rods get ready for the haul to Milton Ontario's "D'SOUSA Performance", the stock powerplant in 1FUN TOY is ready to be removed.

Attached image(s)

  • Attached Image: post-86-1116782485.jpg


#9 Mustang: Ride The Horse

    2KOOL Team Member

  • Admin
  • 3,455 posts

Posted 22 May 2005 - 05:15 PM

:unsure: Sad to see her go, but she will like what's coming joy.gif
Straight lines are for cars.
Corners are for drivers!!!

#10 Guest_Spenc_*

  • Guests

Posted 21 June 2005 - 03:05 PM

Mr. Gasket Sponsors Project MILD 2 WILD

We would like to thank Mike Stasko from Mr Gasket for his show of support, in offering our project a set of LAKEWOOD Drag Shocks and Struts, along with a Driveshaft safety loop! With the numbers we plan to turn with 1FUN TOY, a free wheel'n driveshaft is something we don't want to see coming through the floor, 'or' plunging into the ashpalt on track runs! Thanks a bunch Mike!

We looked to Mr Gasket and LAKEWOOD, to help transfer weight during launches on our soon to be newly powered 'hell ride' :P

http://www.mrgasket.com/ check out the massive line-up of performance products from Mr Gasket. You can acquire all parts right here through 2KOOL PERFORMANCE at the lowest price in Canada! cool.gif

Attached image(s)

  • Attached Image: post-86-1119384334.jpg


#11 Guest_Spenc_*

  • Guests

Posted 30 June 2005 - 10:35 AM

ACCUFAB

Sponsors Project MILD 2 WILD

We would like to thank Jenniffer Burgi from ACCUFAB for helping us with a new throttle body. Our project ride will have to LOOK GOOD & GO FAST , and with the quality of the parts coming out of ACCUFAB, there was no where else to turn for help in this department. What you see here is 80mm of sucking demon, that will go along way in getting us into the 9 second range!

Keep in mind, you can buy all your ACCUFAB products, right here through 2KOOL PERFORMANCE. We provide the highest quality products on the market for all our clientele, with an unmatched product availabilty & Price!

Thanks again Jen... part looks "SWEET"

Attached image(s)

  • Attached Image: post-86-1120145741.jpg


#12 Guest_Spenc_*

  • Guests

Posted 04 July 2005 - 02:14 PM

FLUIDAMPR

Sponsors Project MILD 2 WILD

We would like to thank the great staff over at FLUIDAMPR for helping us with a new DAMPER for our project ride.

Thanks again Greg! part looks Great :nice: http://www.fluidampr.com/

Attached image(s)

  • Attached Image: post-86-1120504465.jpg


#13 Guest_Spenc_*

  • Guests

Posted 02 August 2005 - 07:19 AM

Block, heads and internals have been sent to D'Sousa Performance in Milton. Joe D'Sousa was our engine builder of choice and we're thrilled to have his skills provided for this project.

Attached image(s)

  • Attached Image: post-86-1130291764.jpg


#14 Guest_Spenc_*

  • Guests

Posted 26 October 2005 - 09:58 AM

Joe D'Sousa received some of our projects new Motor parts and has already confirmed work has been done on the Trick Flow heads. Pics should follow shortly. joy.gif

Attached image(s)

  • Attached Image: post-86-1130596913.jpg


#15 Guest_Spenc_*

  • Guests

Posted 27 October 2005 - 08:24 AM

FEDERAL MOGUL
Sponsors Project MILD 2 WILD

Wanted to thank Jacques Coulombe from FEDERAL MOGUL for providing us with Fel Pro gaskets for Project MILD 2 WILD. Jacques also offers to our project the CHAMPION Spark Plugs product lineup, which we'll pass along to Joe D'Sousa for his recommendation.

Again, thank you Jacques! :nice:

http://www.federal-mogul.com/cda/channel/i...7691923,00.html


You can get all the Great Federal Mogul products right here! sales@2koolperformance.ca

Attached image(s)

  • Attached Image: post-86-1138986491.jpg


#16 Guest_Spenc_*

  • Guests

Posted 29 October 2005 - 09:52 AM

MILD 2 WILD In the werx! wanna_race.gif


Thanks to Joe D'Sousa and his staff for providing their world class engine building services for our DART block 331 Project Build. At this point, and with VORTECH's support, Joe is telling me "we need no stinking Nitrous!" But we'll hang on to our NX EXPRESS sponsor'd products, as we like that pretty painted tank in the Hatch of 1FUN TOY

Here's some recent pic's Joe has forwarded along.....with some points Joe's made of their prep services for our project



notice the screw in frost plugs which strengthen the block
and are a lot safer

Attached image(s)

  • Attached Image: post-86-1130597523.jpg


#17 Guest_Spenc_*

  • Guests

Posted 29 October 2005 - 09:54 AM

notice the finish on the cylinder walls and the notch to
clear the longer stroke

Attached image(s)

  • Attached Image: post-86-1130597680.jpg


#18 Guest_Spenc_*

  • Guests

Posted 29 October 2005 - 09:58 AM

again, notice the notch to clear the stroke

Attached image(s)

  • Attached Image: post-86-1130597893.jpg


#19 Guest_Spenc_*

  • Guests

Posted 29 October 2005 - 10:03 AM

Our Trick Flow Track Heat R-series cylinder heads finished and reassembled ( there's a few secrets in here I'm sure )

Attached image(s)

  • Attached Image: post-86-1130598193.jpg


#20 Guest_Spenc_*

  • Guests

Posted 29 October 2005 - 10:08 AM

picture of ported exhaust port

Attached image(s)

  • Attached Image: post-86-1130598525.jpg


#21 Guest_Spenc_*

  • Guests

Posted 29 October 2005 - 10:11 AM

block fully machined

Attached image(s)

  • Attached Image: post-86-1130598702.jpg


#22 Guest_Spenc_*

  • Guests

Posted 30 October 2005 - 09:12 AM

Checking the main clearance

Attached image(s)

  • Attached Image: post-86-1130681529.jpg


#23 Guest_Spenc_*

  • Guests

Posted 04 November 2005 - 11:50 AM

LATEMODEL RESTORATION SUPPLY

Wanted to say 'thanks' to Mike Linley from Latemodel Restoration Supply for providing some trick 'clear' taillight housings which we'll custom spray with some purple pearl clearcoat... They should turn out pretty 'slick'. We'll throw some pics up of the end result later in the project build

For now.. make sure to check out this link provided, as we're LATEMODEL RESTORATIONS wholesale distributor here in Canada!.

http://2koolperformance.ca/forum/index.php?showtopic=413

These taillights can be had for only $209 by contacting us at sales@2koolperformance.ca

Again.. thanks Mike

Attached image(s)

  • Attached Image: post-86-1131123026.gif


#24 Guest_Spenc_*

  • Guests

Posted 04 November 2005 - 11:56 AM

SWEET! cool.gif

Attached image(s)

  • Attached Image: post-86-1131123368.jpg


#25 Guest_Spenc_*

  • Guests

Posted 05 December 2005 - 02:29 PM

Not to get 2 JACKED just 'yet'... but promissing news came today from UPR PRODUCTS who want us to call back on Friday.

Fingers crossed... info will come shortly!
joy.gif joy.gif

Attached image(s)

  • Attached Image: post-86-1133811146.gif


#26 Guest_Spenc_*

  • Guests

Posted 13 December 2005 - 11:45 AM

UPR Products COME THROUGH WITH MONSTER SUPPORT 4 PROJECT "MILD 2 WILD" joy.gif

We want to thank Joe, Jeremy and Mark from UPR Products for their support of 1FUN TOY and 'Project MILD 2 WILD'. We met both Mark and Jeremy last year at the Ohio 'Fun Ford Weekend' event and they were just 'super' with us in seeing our project car first hand. Jeremy will be sending us up a complete suspension kit, including their 'Pro Series' K-Member and 'Pro Series' Rear kit. This is a MONSTER help for us in our quest for some 'scary' 1/4 mile times next season.

You can see their great products here http://www.uprproducts.com/ and keep an eye on our 2KOOL 'Online SPECIALS' page here:http://www.2koolperformance.ca/specials/index.htm As well, we'll be working closely with UPR in the future to bring you wicked specials on their quality products! cool.gif

Thanks again Jeremy You_Rock_Emoticon.gif

Attached image(s)

  • Attached Image: post-86-1134492304.gif


#27 Guest_Spenc_*

  • Guests

Posted 14 December 2005 - 03:27 PM

MILODON Supports project MILD 2 WILD with some oil holding super products!

Wanted to say 'thanks' to Ken Sink from MILODON for providing our project with the products it will need to run some serious times! That's a sweet stainless steel dip stick Ken! Make sure to check out this link provided, as you can get all these great manufacturers parts right here through 2KOOL PERFORMANCE, all that the lowest price in Canada - ALWAYS!

http://www.milodon.com/

Again.. thanks Ken!
:nice:

Attached image(s)

  • Attached Image: post-86-1134592391.jpg


#28 Guest_Spenc_*

  • Guests

Posted 14 December 2005 - 04:02 PM

MELLING sends new series HIGH PERFORMANCE OIL PUMP! cool.gif

Thanks to Eric Smith from MELLING for providing our project with the oil pump necessary to keep our soon 2 be supercharged beast "KooL" under some heavy pedal action at the local drag strip in 2006! Make sure to check out the link provided, as we provide the MELLING lineup of world class products here through 2KOOL PERFORMANCE.
http://www.melling.com/
:nice:

Attached image(s)

  • Attached Image: post-86-1134594127.jpg


#29 Guest_Spenc_*

  • Guests

Posted 14 December 2005 - 06:30 PM

HOLLEY sends MONSTER Headers! cool.gif

Anything that says "HOOKER" gets our attention! and putting that name in 1FUN TOY simply had to be done! :P yes, that's going to get me in trouble tease.gif
With 20+ lbs of Boost and Nitrous on tap, we'll have a whole lotta air come'n into our new engine and it looking for an easy way OUT. Thanks to Matt Held at HOLLEY, that won't be a problem anymore! Matt supplied us with their wicked new super trick 'take apart n' put together' 1 3/4" Ceramic Coated headers, which look like every exhaust installers dream! Separated between each tube at the flange and having all tubes join in two's down into the piping, you can pretty much make an octapus out of these puppies! Our engine guru Joe D'Sousa should welcome these bad boys BIG TIME!

Make sure to check out the link provided, as we provide the HOLLEY lineup of performance products here through 2KOOL PERFORMANCE.
http://www.holley.com/
:nice:

Attached image(s)

  • Attached Image: post-86-1134603036.jpg


#30 Guest_Spenc_*

  • Guests

Posted 14 December 2005 - 09:08 PM

ENERGY SUSPENSION will eliminate our new motors vibration cool.gif

Thanks to Greg Corey from ENERGY SUSPENSION when our new motor wants to shimmy and shake it can on a new bed of super engine and tranny mounts! ENERGY SUSPENSION is a world leader in such products so make sure to give their web site a look and let us know if there's anything we can help you with.

http://www.energysuspension.com/
:nice:

Thanks for your help Greg! cool.gif

Attached image(s)

  • Attached Image: post-86-1134612487.jpg